Brief introduction
Demark Holding Group with working area of 240,000 square meters and with capital of USD 50 million, is one of the most important manufacturers in China, offering the solution of PET whole line. Our products include PET injection molding system, needle valve preform mold, fully automatic bottle blow molding machine, PET blowing molds,cap compression molding machine and extrusion molding machine with more than 10 years.
WE ARE PET PACKING PRODUCTION LINE SOLUTION SUPPLIER; CHINA BOTTLE BLOW MOLDING MACHINE, PET INJECTION MOLDING SYSTEM, extrusion molding machine &PET BLOWING MOLDS MANUFACTURE&EXPORT BASE
I. Technical Description Of Main Equipment
DMK-CM cap compression molding machine is applicable for cap production from thermoforming plastics (PP,PE,etc.,) , its rotating design ensures continuous cap production and no injection time, so yield greatly increased.
The machine adopts continuous compression molding hydraulic press for plastic cap manufacturing via the extrusion of dry-blend granulated compounds (i.e. HDPE, PP), metering, pelleting and insertion in the cavities to mould it into the final shape. The capacity of the machine depends heavily on compound properties and the geometry of the manufactured caps.
Advantages:
1. Intelligent PLC controlling system
2. Human-machine interface, easy & stable operation
3.Machine adopts world-class industry design and processing crafts,exquisite electrical
configuration and superb assembling technology
4.Easy computer operation realizes full-auto production from PP&PE resin to final cap
5.Rotation compressing cap molding offers shorter recycling time,high yielding and fine final
caps,caps with no injection point and easy for cap logo printing
6.Cap with high density, short change-over time for one color cap to another.
7.Low energy consumption,output triples compared with the traditional cap injection molding machine
8. Each cap mold is independently compressed, no runner scrap.
9. Easy and low cost mold maintenance
10.High efficiency, reasonable price
B. Technical Parameter:
| Type |
Model |
DMK-CM24 |
| Cap |
Number of Cavity |
24cavities |
| Output (pcs/hr) |
17000-22000 |
| Raw Material |
PP/PE/PTE |
| Diameter of Cap(mm) |
22-45 |
| Height of Cap(mm) |
10-25 |
| ELECTRICAL SYSTEM |
Actual Power Consumption(kw) |
25-28 |
| Installation Power(kw) |
55 |
| Power Supply |
380V 50Hz |
| (Three Phase,Five Wire) |
| AIR SYSTEM |
Operation Pressure(Mpa) |
0.8 |
| Pressure Consuming(m3/hr) |
1.0 |
| MACHINE |
Overall Dimension(L*W*H)(m) |
5.3x2.1x2.65 |
| Weight(t) |
6.5 |
){kind=link}