New 96 Cavities Pet Preform Making Machines

• Customization: Available
• Type: Preform Injection
• Structure: Horizontal
• Model NO.: iPET400/5000
• Plastic Type: Thermoplastic
• Automation: Automatic
• Computerized: Computerized
• Function: for Injection Pet Preform
• Transport Package: Wooden Package
• Specification: 29000pcs/hr, 96 cav, 13g / 9s, 380T/7500g,
• Trademark: DEMARK
• Origin: China
• HS Code: 84771010
• Production Capacity: 30 Sets/Year

Product Description

Demark 96 cavities PET Preform Line@(injection moulding machine@injection moulding system@injection molding system@) uses a new part cooling and handling system, which features:

1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization _ being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
Demark pet injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up

Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;

Soft flexible patens
Flexible platens distribute clamp force evenly across the platen face.
Flexible platens:
1. Allow for lower clamp tonnage 20% around
2. Decrease mold wear
3. Improve part quality

Injection Units
Demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.

PC Control System
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface

Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.

ITEM		UNIT	DP260/3500	DP260/5000	DP380/3500	DP380/5000	DP380/7500
INJECTION     UNIT	Screw L/D Ratio	L/D	25	25	25	25	25
	Screw   Diameter	mm	100	120	100	120	140
	Output(Max)	kg/h	380	700	380	700	870
	Injection   Pressure	kgf/cm 2	875	875	875	875	875
	Theroy Shot Volume(Max)	cm 3	2900	4100	2900	4100	6300
	Shot Weight(PS)	g	3500	5000	3500	5000	7500
		oz	124	175	124	175	270
CLAMPING   UNIT	Clamping Force	T	260	260	380	380	380
	Clamping Stroke	mm	585	585	670	670	670
	Max/Min Thickness of the Mould	mm	300~720	300~720	300~820	300~820	300~820
	Space Between Tie Bars(WxH)	mm	660x760	660x760	845x845	300~820	845x845
	Ejector Stroke	mm	180	180	180	180	180
	Ejector Force	T	20	20	28	28	28
	No.of Ejector Pins	pcs	9	9	13	13	13
	MAX PRESSURE OF SYSTEM	kg/cm 2	180	180	180	180	180
INJECTED EMBRYOS DIE	Cavity(Max)	cavity	48	72	72	96	128
	Neck of Bottle(Max)	mm	42	42	42	42	42
	Length of Preform(Max)	mm	190	190	220	220	220
	Weight of Preform (Max)	g	32	45	32	45	45
	Type of Mould	PNEUMATIC NEEDLE VALVE TYPE HOT RUNNER
THE ELECTRICAL SYSTEM	Pump Motor Power	KW	55+75	75+90	75+75	75+90	75+110
	Robot Power	KW	15	15	25	25	25
	Heater Input Capacity	KW	85	100	85	100	120
	Mould input Capacity	KW	50	55	68	68	68
Robot	Manipulator	Cavity	144	216	216	288	384
	Preform Cooling Device	Cavity	144	216	216	288	384
	Machine Size (LxWxH)	cm	263X157X230	263X157X230	281X160X250	281X160X250	281X160X250
Configuration Requirements	Electric Power Supply(3-phaseAC)	V	380	380	380	380	380
		KW	280	335	330	335	380
	Chilling   Water	ºC	5~15	5~15	5~15	5~15	5~15
		Mpa	0.45	0.45	0.45	0.45	0.45
		L/min	600	800	800	1000	1200
	Cooling Water	ºC	<25	<25	<25	<25	<25
		Mpa	0.25	0.25	0.25	0.25	0.25
		L/min	200	200	200	200	200
	Compressed Air	Mpa	0.7~0.9	0.7~0.9	0.7~0.9	0.7~0.9	0.7~0.9
		L/min	800	800	1200	1200	1200
Maximum Productivity		pcs/h	21000	31000	31000	43000	57000
Host Size(LxWxH)		cm	930X180X250	990X180X260	1050X205X250	1090X205X260	1130X205X260
Machine Total Weight		T	26	28	32	34	37