| ITEMS | S260/2000 |
| INJECTION UNIT | Screw L/D Ratio | L/D | 25 |
| Screw Dia. | mm | 80 |
| Injection Pressure | kgf/cm2 | 1200 |
| theory Shot Volume(Max) | cm3 | 1650 |
| Shot Weight(PS) | g | 1600 |
| oz | 71 |
| CLAMPING UNIT | Clamping Force | T | 260 |
| Clamping Stroke | mm | 540 |
| Max/Min Thickness of Mould | mm | 200~580 |
| Space Between Tie Bars (WxH) | mm | 570x570 |
| Ejector Stroke | mm | 150 |
| Ejector Force | T | 8 |
| NO.of Ejector Pins | pcs | 9 |
| Max Pressure of System | kg/cm2 | 160 |
| PREFORM MOLD | Cavity (Max) | PCS | 32 |
| Neck of Bottle (Max) | mm | 38 |
| Length of Preform(Max) | mm | 150 |
| Weight of Preform(Max) | g | 50 |
| Form of Mould | | hot runner |
| POWER | Pump Motor Power | KW | 36 |
| UNIT | Heater Input Capacity | KW | 35.6 |
| | Mould Heator Capacity | KW | 30 |
| OTHER | Electric Power Supply(3 phase AC) | V | 380 |
| KW | 101.6 |
| Chilling Water | ºC | 5~10 |
| Mpa | 0.8 |
| L/min | 500 |
| Cooling Water | ºC | <25 |
| Mpa | 0.3 |
| L/min | 100 |
| Compressed Air | Mpa | 0.7~0.9 |
| L/min | 50 |
| | Machine Size(LXWXH) | cm | 840X160X250 |
| | Machine Weight | T | 13 |
Control system
Siemens industrial control system.
By using data communication, the system with movement fast reaction and multi movement corporation capability.
With alarm system and fault recording function, the system running safe with fully protection.
With remote real-time monitoring and fault diagnosing function, the system could be controlled in your own office.
The mold temperature could be controlled in control panel with high accuracy.
Equipped with 12 inches control screen.
Temperature control system
Equipped heater from Italy and protector outside the heater.
The accuracy of temperature could reach ±1 degree with PID control.
The constant power module makes the mold temperature stable and non-influenced by the voltage.
Plasticization & Injection
Barrier design screw improved the plasticization effect.
Screw with chrome and the L:D ratio reach 25:1.
The differential injection cylinder decrease the injection resistance and improve the injection accuracy.
Back pressure could adjust on the control panel.
Clamping Unit
Special clamping parameter design for PET make the mold open & close stable and fast.
Strong mold plate make the mold get pressure balanced.
Also compatible with HUSKY mold.
Ejection Unit
With more ejecting pin make better ejection.
Bigger ejecting force than normal machine.
Ejecting stop work with the light sensor which protect the mold.
Innovation on water and gas circuit
Centralized cooling water supply for mold, robot and auxiliary machine.
Stainless quick plug for cooling water.
Needle control in the mold use the MAC big volume valve which improve the speed and stability.
High reliability of the whole machine
The clamping unit is welded by H type steel.
Injection unit using 10mm steel while robot frame using square tube.
OUR EXHIBITION SHOW
CNC EQUIPMENTS SHOW
CONTACT US
Audited Supplier 
){kind=link}